b'AAR VINTAGE-WARRIORChoice of Panhard Bar or Watts Link System Vintage-Warrior Double Adjustable Panhard Bar System:oWeld-On Passenger Side Axle Mount Utilizes a Jack Screw for 6 of Adjustability from Axle Centerline Down as Much as 6.00 with the Same Billet Steel Adjuster as Our Watts Link oDriver Side Unit Clamps to the 1.75 Round Chassis Tube Frame with 3.25 of Jack Screw Adjustability & Can Be Loosened to Move its Range Up or Down the Chassis Tubeo1.25 OD x .095 4130 Chromoly Tube Tig Welded with 3/4" Threaded Tube Ends o3/4" x 3/4 Wide Body, Chromoly Rod Ends, Rated for 28,000# Load oNylatron Matrix Liner (Similar to Kevlar) 1# Stiction & Self Lubricatingo3/4-NF 170,000 KSI 12-Point Bolts, AN Washers & AN Nylocks oWide Range of Adjustability / Run Higher Rear Roll Center with Soft Rear Springs on Rough Tracks & Lower Rear RC for Stiffer Rear Springs on Smoother, Faster Tracks "At some point in every racer\'s life he has to make his peace withcheating. I do not approve of cheating . at all. Of course, like every successful racer, I differentiate between taking advantage ofloopholes in the regulations, stretching the grey areas and outright cheating.In any given racing series I will not start the cheating. If someoneelse starts it, I will appeal to them and to the officials to stop it. If my efforts do not succeed, then I\'ll show them how it is done " - Carroll Smith, Drive to Win86'