b'AAR VINTAGE-WARRIORAAR Track-Warrior Underslung Rear Frame Clip:oMIG Welded, AAR Rear Clip with Lower Link Suspension Brackets Welded in Place o2 x 2 x .083 Lower Rails / All Other Tubes are Round DOM Steel oBuilt & MIG Welded on Our Precision Fixture Table with a Max Surface Variation of .003 oTube Diameters & Wall Thickness Optimized for Balance of Chassis Rigidity & WeightMIG Welded 1.75 OD DOM Integral Crossmember & Sway Bar Mounting Tube Rear Clip Option DOM Round Tubing INCLUDEDColor Spec Legend is on Page XXXSlotted Lower LinkRear Frame Angles to Fit Mount Curved toRSRT/Fuel Safe Fuel Cells Match Radiusfor Lower & Forward MassThese Upright Tubes Mount Either the Panhard Bar Adjuster or Watts FrameworkThe Open Top IsOnly for Rear Clip Finishing: Images / The Brackets Geto2 x 2 Square & 1.75 Round Plates Capped with a Formed Plate are MIG Welded to Cap All Crossmember Open Ends oBecause the Mid-Rail Attaches to the Main Hoop, the Shock Mount Jack Screw Bosses are NOT Welded on. To Do So would Require Us to Install the Main Hoop. That Needs to Be Performed By You with the Body to Ensure Tight Fitment to the Roof oGood News: The Mid Rail Comes Prenotched Front, Back & for the Shock Bosses to Fit Perfectly Driveshaft Loop: o1 x 2 Mild Steel Oval Loop oComes in 2 Halves / Cut & Weld to Make Perfect Height for Your Car oThe Crossmember is Laser Notched for Our Wide Driveshaft Loop 1 Offset oOptionallyRSRT Can Cut & MIG Weld the 2 Halves & MIG Weld the Driveshaft Loop Into Place -Or- You Can Do It Yourself to Save Money 82'