b'Vintage-Warriors Defined GTT Vintage-Warriors are Designed to Race in SVRA/HSR Group 10, Under the IMSA GTU Series Rules 1984-1988, GTO Rules 1989-1994 or GTS Rules 1992-1994 with Inline 4 Cylinder Race Engines. 2350# to 2800#, with 310/650R18 Hoosier Front Tires & 310/680R18 Rear.oAll with 4.50 Engine Setback, 2350#-2800#, with 310/650R18 Hoosier Front Tires & 310/680R18 Rear.oRide Height is 2.50 Per SVRA Rules. Track Width is 64.7 with an Outside Sidewall Width of 77.50+ for 79.00 IMSA Silhouette Bodies from That Era. Bodies Start on Page XXX oIMSA GTU Series Rules 1984-1988 Allowed 2.2L-3.0L, 4V, Non-Turbo, Inline 4 Cylinder Race Engines with 4.50 Engine Setback oIMSA GTU Series Rules 1987-1988 Allowed 2.1L-3.0L, Turbo, Inline 4 Cylinder Race Engines with 4.50 Engine Setback oIMSA GTO Series Rules 1989-1994 Allowed 2.0L-3.0L, Turbo, Inline 4 Cylinder Race Engines with 4.50 Engine Setback oIMSA GTS Series Rules 1992-1994 Allowed 3.0L & Larger, Turbo, Inline 4 Cylinder Race Engines (19 FACL to Rear of Block) GT2 Vintage-Warriors are Designed to Race in SVRA/HSR Group 10, Under Vintage SCCA GT2 Series Rules. Designed for Inline 4 Cylinder & V6Race Engines (0.00 Setback), 2350#-2800#, with 315/30R18 Hoosier Front Tires & 335/30R18 Rear.oRide Height is 2.50 Per SVRA Rules. Track Width is 62.0 with an Outside Sidewall Width of 76.00+ for 77.00 Silhouette Bodies from That Era. Bodies Start on Page XXX oThe GT2 Vintage-Warrior Can Be Configured to Run in SVRA/HSR Group 12, Under the Same GT2 Rules with Hoosier 23.5x11.0R16 Tires on All 4 Corners.GT6 Vintage-Warriors are Designed to Race in SVRA/HSR Group 10, Under Vintage SCCA GT2 Series Rules. Designed for Inline 6 Cylinder Race Engines (0.00 Setback), 2350#-2800#, with 315/30R18 Hoosier Front Tires & 335/30R18 Rear.oRide Height is 2.50 Per SVRA Rules. Track Width is 62.0 with an Outside Sidewall Width of 76.00+ for 77.00 Silhouette Bodies from That Era. Bodies Start on Page XXX oWhile Any SCCA Approved Inline 6 Cylinder Race Engine Through the Years is Legal, the Chassis was Specifically Designed to Fit the Larger BMW & Datsun/Nissan Inline 6s. oThe GT6 Vintage-Warrior Can Be Configured to Run in SVRA/HSR Group 12, Under the Same GT2 Rules with Hoosier 23.5x11.0R16 Tires on All 4 Corners.GTS Vintage-Warriors are Designed to Race in SVRA/HSR Group 10, Under the IMSA GTU Series Rules 1984-1994, GTO Rules 1984-1994 or GTS-1 Rules 95-98. Designed for Inline 6 Cylinder Race Engines (0.00 Setback), 2350#-2800#, with 315/30R18 Hoosier Front Tires & 335/30R18 Rear.oRide Height is 2.50 Per SVRA Rules. Track Width is 64.0 with an Outside Sidewall Width of 77.50+ for 79.00 IMSA Silhouette Bodies from That Era. Bodies Start on Page XXX oWhile Any IMSA Approved Inline 6 Cylinder Race Engine Through the Years is Legal, the Chassis was Specifically Designed to Fit the Larger BMW & Datsun/Nissan Inline 6s. oThe GTS Vintage-Warrior Can Be Configured to Run in SVRA/HSR Group 12, Under the Same IMSA Rules with Hoosier 23.5x11.0R16 Tires on All 4 Corners.14'