b'GM F/X TRACK-PRORidetech Quik-Tune Adjustable Rear Sway Bar: oPrecision CNC Bent Tubular Sway Bar o1 Diameter DOM x Wall Thickness .156 oAdjustable Rate with Sliding Mounts oRange from 200# to 400# oRelatively Quick & Easy to Tune oYou Can Even Tune Just One SideTRACK-PRO 9" Ford MOD-LITE Floater Rear End:oMod-Lite Floater Rear Ends Have Been Utilized in Racing Series with Race Cars Under 3600# & Up to 700HP for Years. They are the Key for Safety & Zero Brake Knock-Back! oThe Mod-Lite Floater is Lighter, Medium-Duty Compared to the Grand National o3 OD x .188 DOM Tubes with Vent Hole, Filler Cap & Drain Plug Welded In oMod-Lite ALUMINUM Floater Hubs & 1.811 ID Dual Tapered Bearings oRear Suspension & Brake Brackets Professionally Welded On oSteel Drive Plates 5 x 5.00 / 5/8-18 Wheel Studs oInner Axle Seals Included to Help Contain Gear Oil & Reduce Gear Oil LeaksoOil Cooler Inlet & Outlet Ports Optional Ask Ron AboutHub Upgrade Options Tech Tip 9: Did you know you can run your sway bar links in different locations on each side to split the rate? The sway bar works the samewith the same bar rateon left & right hand corners regardless of any arm length differences on the opposing sides. So, if your sliding mount rear sway bar rate ranges from 200# to 400#you could slide one link to a different location to fine tune the rate change. Works the same on the front slider bar.Need a little more rear grip?Adjust either slide mount to make the arm longer. Need a little more front grip?Adjust either slide mount to make the arm shorter.897'