b'FORD RACE-STAR AIXO PTIONALGT W ATTSL INK WITHQ UIK -T UNE Quik-Tune GT Watts Link: oThe Best Watts Link System!oChromoly Framework TIG Welded to DOM Crossmember o6061-T6 Bellcrank w/Thick Clevises & Dual HD Roller Bearings oChromoly Triangulated Driver Side Mount oPassenger Side Link Attaches on the Lower Shock Mount o1 DOM Thick Wall Tubes & 170,000 Tensile Strength Bolts oWide Body Chromoly Rod Ends (18,000# Rated) Trunk Extension IncludedThe Key is Our Trick Billet Steel Adjuster with Jack Screw: oJack Screw Adjuster Offers 6 of Roll Center Tuning Range! oMake Fine or Coarse Adjustments with 1/2 Ratchet at ConeoAdjuster Cone Mounts Top or Bottom, or into Trunk for with Extension oQuickest, Easiest & Most Accurate Rear Roll Center Tuning What is Quik-Tune & Why Do You Want It? oFace Itif Tuning Adjustments are Slow or Hard to Do They Usually Dont Get Made & We Suffer Through a Less Than Optimum Handling Car. Our Quik-Tune is the Solution! oWith a 1/2" Ratchet, You Can Tune Your Rear Roll Center HeightTO BALANCE THE HANDLING OF YOUR CAR FOR ANY TRACK CONDITIONin Seconds, Not Minutes. oIf the Track is Low-Gripand Your Car is Free (Rotates Too Easily) or Loose (Oversteer)Simply Adjust Your Rear Roll Center Down to Shift Grip from the Front to the RearoIf the Track is High-Gripand Your Car is Tight (Hard to Turn) or Pushing (Understeer)Simply Adjust Your Rear Roll Center Up to Shift Grip from the Rear to the Front Build Tip ??: Making brackets out of the wrong aluminum is common. Here is a quick metallurgy lesson for the day. Common 6061-T6 is hardened. You can machine, drill or weld it & but do NOT bend it. 5052 aluminum is high strength, bendable & weldable, but too soft to machine. 2024 aluminum is heat treatable & machinable, but does not weld or bend well. 3003 is soft, bendable, formable, weldable & great for interior sheet metal, trans tunnels, tanks, etc.1101'