b'GM F/X AUTOX-PROSpeedtech Torque Arm Rear Suspension: oComplete Speedtech Torque Arm Rear Suspension Package oGR50 Steel, Formed & Welded Torque Arm UnitoBillet Aluminum Pinion Mount / Pinion Angle Adjustable with Shims oStandard Length is 57 / Discuss Optional Lengths with Ron Sutton oFormed & Welded Front Crossmember Bolts Into Factory Front Subframe Holes oPrefabricated Crossmember to Mount the Shocks & Panhard Bar oRequires Welding in Place for High Load Applications oIncludes Combination Axle Brackets to Mount the Lower Links & Shocks oArticulating Lower Links with Delrin Bushings Front & Rear oIn Our Package, the Lower Links Mount to the Strong Subframe Connectors Instead of the Factory Leaf Spring Bucket with Normal Speedtech Installs oAll Hardware, Bushings & Instructions are Included oThe Axle Brackets are Welded Onto the Axle Housing Narrower than StandardSpeedtech Installs, Allowing Straight (Not Offset) Lower Links, Regardless of Car ModelOffset Subframe Connectors with Integral Lower Link Mounts:o2x2 WELD-IN Subframe Connectors oCutting & Welding of Floor Required oCan Bolt or Weld to Front Subframe oRear Lower Links are Offset in the Mountsto Provide Additional Inner Tire Clearance oIf K Member Style Crossmember isUtilized for the Front Torque Arm Mount the Crossmember & Braces Weld to These 2x2 Subframe Connectors130'