b'GM F/X AXT-STARTrack-Pro Spindles & Track-Pro Hub/Bearing Assemblies: oStrong & Lightweight T1 Steel UprightoMPI C6 Corvette Heavy Duty Hub/Bearing Assembly oUltra Precision & Premium Materials Rated at 1375# & 1625#o5 x 4.75 Wheel Pattern oNew ARP 1/2"-20 Long Wheel Studs Included, but Not InstalledAsk Ron AboutoThe Narrowest Spindle & Hub Package on the MarketHub Upgrade oLower Scrub Radius & More Room for Big BrakesOptions oWilwood 13 & 14 & StopTech 14 Brakes Available for this Spindle Tech Tip 21: If you draw a line through your upper & lower ball joints, to the ground, that is your cars steering axis. Your cars scrub radiusis the distance from the steering axis to tread centerline at ground level.If the steering axis intersects the center of your tread, that would be Zero Scrub Radius. The tire would literally PIVOT in the center of the tread as the car is steered, providing more grip when turning.Most production cars have 3-6 scrub radius & this causes the tirecontact patch to scrub as the car is steered. This is literally rippingthe tread around the steering axis further inboard, versus simplypivoting at the center of the tread. This dramatically reduces the tires grip on tight corners. All RSRT front suspensions are low, or zero, scrub radiusfor more grip on tight corners!577'