b'GTA TRACK-WARRIORSweet Road Racing Rack & Pinion / Std Cylinder:oRacing Rack & Pinion with All the Great Sweet Features oStudded Ends Allow Optimum Bump Steer Curve While Keeping Rack Mounted Low oSteering Rates Available from Steady 1.88 to Lightning Quick 4.40 oWe Utilize 2.50 Standard for Track Day Cars & Road Racing oIntegral (But Changeable) Servo with .210 Torsion Bar for Medium Firmness Feel oSofter & Stiffer Torsion Bars Available When Ordering at No Additional Charge oStandard Dual Power Cylinder - Built to Handle Up to 12.5 Front Slicks TRACK-PRO-15 Quik-Tune Tie Rod Package: oThick Wall .156 DOM Tie Rod Tubes / Direct Threaded oChromoly High-Angle Inner & Outer Tie Rod Ends w/Teflon Liners Allow 22 of Angle! o170,000 PSI 5/8 Pro Bump Steer System with Full Range of Shims & SpacersoQuick & Easy Bump Steering Tuning, as Well as Toe-Out Setting ChangesBuild Tip: Making components out of the wrong aluminum is unfortunately too common. Here is a quick metallurgy lesson on grades of aluminum. 6061-T6 is hardened. You can machine, drill or weld it & but do NOT bend it.5052 aluminum is high strength, bendable & weldable, but too soft to machine.2024 aluminum is heat treatable & machinable, but does not weld or bend well. 3003 is soft, bendable, formable & weldable, but work hardens the easiest of these 4 RSRT utilizes 6061-T6 in most of our machined parts. 2024 is not as strong, plus you cant weld 2024. 5052 is best for brackets & components that need to be bent & drilledeven weldedbut machined. 3003 is best for thin, flat sheetmetal you need to bend & weld.83'