b'XR7 TRACK-WARRIORThis is NO ONE-SIZE FITS ALL Bullshit!We Build Your Track-Warrior to Fit Your Car & Goals: oThink of What We Offer as Either Semi-Custom or Tailored for You oWheelbase?You Decide. Anything Between 97 to 116 oWidth?You Decide. 315 Tire Sidewall Widths from 68.2 to 76.2, to Fit Body Widths from 70 to 78. Bodies Wider than 74 Utilizes Longer Control Arms, with MIG Welded Uppers oRide Height?(A Below) We Recommend 4.00 But Offer 3 to 5 in 1/2 Increments oC Baseline is 24.25 / D & E are Tailored to Your Body Style & Dimensions oWe Build Each Track-Warrior Front Clip on a Precision Fixture Table with only .003 Variance, for Each Individual Application / No Assembly Line / No One-Size Fits AllSkills Required: oMetal Fabrication Skills to Cut, Grind, File, Sand, Notch Tubing & Weld oLayout Skills to Accurately Measure, Align, Level & Square the Clips to Each Other oMild Steel Frame & DOM Cage, So Professional Level MIG Welding Skills Required oSheet Metal Brake, Shear & Cut Skills to Make the Firewall & All Interior Panels oRSRT Kits Make Mounting the Body, Doors, Front End & Deck Lid Easier with the Same Skills of Cutting, Notching & Welding / Patience is the Key to Aligning Body PanelsoFiberglass/Composite Bodies are Much Easier to Modify, Flare, Widen, Etc.But Harder to Align Panels & Keep Them Aligned Through the Build / Patience & Persistence is Key oRon Sutton is Available for Tech Support Direct to You, or Your Chosen Builder. While He Cant Teach You Skills Over the Phone, He Can & Does Answer Your Questions to Ensure Your Build Goes Well. After the Build, Hes There for Setup & Track Tuning Support 191'