b'Welded Rear Frame Clip welded rear framestandard on this package Welded Rear Frame Clip - Tailored to Fit Your Car: oPrecision Fixture MIG Welded for Trueness & Accuracy of Suspension Mounts oCrossmember for Main Hoop & Rear Axle Centerline Accurate for Your Specific Car oShips on a Pallet Ready to Mock Up & Weld Into Your Track-Warrior ChassisInstalled & Welded In Place: oOffset Upright J-Bar at 5 Angle to Mate to Roll Cage Main Hoop oWatts Link Framework with Bellcrank Adjuster BlockJIG WeldedoRear Sway Bar Tube / Deburred for BushingsRear Frame Option oAll 3-Link & Shock Suspension Brackets Welded in Place oDriveshaft Loop on SOME MODELSINCLUDED Weld Option Includes: o25 Angled ShockJack Screw BossesWelded in PlaceoWatts Link FrameworkWelded In Centered & TrueoRear Sway Bar Tube Cut,Installed & Cleared for BushingsoJ-Bar Located & Angled toMatch & Fit Your Roll CageoDecel Link Brackets Locatedon J-Bar for Optimum Pro-SquatoSlotted Lower Link Mounts Weldedon Crossmember & Cappedo This Rear Clip Does oRear Suspension NOT Assembled !Not Have Notch. The Center Gets Cut Out & Capped by BuilderOPTION: Pair of Individual Frame Rails & CrossmemberDeduct $1600: oMany Builders Want to Weld Up the Rear Frames Rails Themselves, so We Can Ship the Frame Rails & Notched Crossmember Unwelded. They are Extra Long for You to Cut to Fit oAs Explained on the Previous Page, These Frame Rails are Lased Notched & MIG Welded in a Fixture. With this Option, the Frame Rails Would NOT be Welded Up as a Rear Clip Build Tip: Ideally you would install the clips & build your car of a flat surface table. Its not 100% necessary, but we highly recommend it. Realize no shop floors are level. So if you build yours on the shop floor you need to take the time to elevate & level both front & rear frame clips with shims. Once perfectly level, check & adjust clip squareness to each other & thewheelbase. When all good, cut & tack weld in the center framework with the blueprints &materials we provide. After this, weld up the mid-frame & begin roll cage installation. 567'