b'Warrior Radiators & PlumbingC&R Radiator, Fan & Engine Oil Cooler600HP: oChevy Style 27.5 x 16.26 for LS oC&R Racing R-Fin Technology oMade in USA at C&R Factory oDouble Pass Crossflow DesignoPWR 28-Plate Oil Cooler oChoice of -10 or -12 Oil Cooler Fittings oClosed System (No Radiator Cap) oSPAL 13 High Flow Electric Fan oRated up to 600HP for Road RacingC&R Radiator, Fan & Engine Oil Cooler700HP: oChevy Style 28 x 16.5 for LS o27mm Denso Racing Core oMade in USA at C&R Factory oDouble Pass Crossflow DesignoPWR 28x16.5x 19mm Oil Cooler oIntegral -12 Male Oil Cooler Fittings oChoice of -16 or -20 Upper Hose FittingoClosed System (No Radiator Cap) oSPAL 14 High Flow Electric Fan oRated up to 700HP for Road Racing C&R Radiator, Fan & Engine Oil Cooler750HP: oSame as Above Except 28 x 18.5 & 16 FanIncluded with All Three RSRT Radiator Packages Above: C&R Steam Line Kit: oPlumbs into Front of LS Heads oKeeps Steam Pockets Out of HeadsFan Relay for Switch: oWaterproof 10/40 Amp RelayoPrinted Wires for Easy InstallationCoolant Expansion Tank: oTIG Welded 5052 Aluminum / 35 Oz. Capacity oHas Flat Panel Mounts / No Hardware o1/4 NPT Fitting at the Top for an Air Bleed Line o1/2 NPT Near Bottom for Hose to Water Pump o1/8 Fitting for Coolant Overflow / Blow Off PortC&R or Stant Racing Radiator Cap 38-42 PSI 6-Pack of Water WetterRadiator Overflow Blow Off Port: oAluminum Radiator Overflow Fitting1 OD oActs as a Signal to the Driver Indicating an Overheating Condition if the Cooling System Pushes Out Water or Steam oFitting with Threaded Body and Nut Mounts in a Body Panel(typically Hood or Fender) Outside the Drivers Compartment 700'