b'GTA TRACK-WARRIORBuild-Your-owncomplete chassis & suspension package The GTA Track-Warrior is an All-in-One Package to Build a Tube Chassis Track Car with Race Car Bodies from 74.5 to 79.5 & 15 Wheels. Designed for the SCCA GTA Class with Composite Body. Bodies are on Pages 588-597. You can Build Yours with a Steel Body for a Throw Back NASCAR or IMSA Kelly Challenge Track-Car. Several Sources Around the Country that Build Steel Stock Car Style Bodies like SS Monte Carlos, Camaros, Mustangs, Challengers & Other Styles. See Pages 598-601.The GTA Track-Warrior Suspension has Better Geometry than Late Model Stock Car Chassis & TA2 Cars, Because it Was Designed from Scratch to be a Road Race Car, NOT an Oval Track Car. Runs 15 x 10 Wheels with 11.5 Wide Hoosier Radial Road Race Slicks (27.5x11.5R15) on All Four Corners. Standard Wheelbase is 105 & Ride Height is 3.50 with a 0.5 Rake Down in the Front. Can Be Built with 101-110 Wheelbase & Ride Height of 2.50 to 4.50 as You Choose. Fully Optimized Geometry & Suspension Setup to Travel 3.00 in Full Dive & Roll 1.0 at Max G-Force.Fits into Almost Every Track Day Organization for Fast Fun. Competitive in SCCA GTA Racing & NASA Super Touring & Similar Classes in EMRA, COM & NorthEast GT. Plus All Time Trials & Time Attack. Ron Sutton Designed this Tube Chassis Light & Strong, for Total Car & Driver Weight Ranges of 2600#to 3000# & Up to 700HP. Every Tube is Strategic in Size & Placement to Create Chassis Rigidity Where it is Needed for Track Performance & Increased Driver Protection, Without Unnecessary Weight. The 5-Zone Design Includes a Strong Cockpit & 4 Crush Zones. Two in Front & Two in the Rear. This is NOT a Stock Car Suspension Adapted to Road Courses. This Complete Package is Engineered by Ron Sutton for Road Courses with Proven Race Technology & Quality Components. The TA Front Clip is MIG Welded on a Precision Fixture Table. It Utilizes Our New, ZXR Lower, Chromoly Control Arms & GT Upper Control Arm & Jack-Screw Shock Mount Package. Steel RSRT Track-Pro Spindles, with High Ackerman & Slotted Steering Arms are Steered by a Sweet Road Race Rack. Combined with the RSRT 3-Link/Watts Link Rear Suspension & Digressive Valved, Single Adjustable RSRT/Fox Shocks, Provides Great Road Course Handling. This Track-Warrior Package is Designed for Quick & Easy Tuning for Track Conditions with Single Adjustable ShocksQuik-Tune Watts LinkQuik-Tune Ride-Height & Corner Weight Adjustersand 5 Fine Tuning Rates on the Front Sway Bar & 7 Fine Tuning Rates on the Rear Sway Bar. Our Offset 3-Link, Offers Zero Torque Steer & Optimum Anti-Squat for the Best Balance of Rear Grip on Corner Entry & Exit. This ZR7 Track-Warrior is a Fun, Fast, Affordable, Tube Chassis Track Car Package, Ready for You to Build it. Learn the Details in the Following Pages.74'