b'GN7 TRACK-WARRIORRace-Warrior Underslung Rear Frame Clip:oTIG Welded, Rear Clip with Lower Link Suspension Brackets Welded in Place o2 x 2 x .083 Lower Rails / All Other Tubes are Round 4130 Chromoly oBuilt & TIG Welded on Our Precision Fixture Table with a Max Surface Variation of .003 oTube Diameters & Wall Thickness Optimized for Balance of Chassis Rigidity & Weight 1.75 OD Chromoly Integral Crossmember TIG Welded & Sway Bar Mounting Tube Rear Clip Option 4130 Chromoly Tubing INCLUDEDColor Spec Legend is on Page XXXSlotted Lower Link Mount Curved toRear Frame Angles to Fit Match RadiusRSRT/Fuel Safe Fuel Cells for Lower & Forward Mass These Upright Tubes Mount Either the Panhard Bar Adjuster or Watts FrameworkThe Open Top IsOnly for Images / The Brackets Get Rear Clip Finishing: Capped with a Formed Plateo 2 x 2 Square & 1.75 Round Plates are TIG Welded to Cap All Crossmember Open Ends o Because the Mid-Rail Attaches to the Main Hoop, the Shock Mount Jack Screw Bosses are NOT Welded on. To Do So would Require Us to Install the Main Hoop. That Needs to Be Performed By You with the Body to Ensure Tight Fitment to the Roof o Good News: The Mid Rail Comes Prenotched Front, Back & for the Shock Bosses to Fit Perfectly Driveshaft Loop: o 1 x 2 Mild Steel Oval Loop o Comes in 2 Halves / Cut & Weld to Make Perfect Height for Your Car o The Crossmember is Laser Notched for Our Wide Driveshaft Loop 1 Offset o OptionallyRSRT Can Cut & TIG Weld the 2 Halves & TIG Weld the Driveshaft Loop Into Place -Or- You Can Do It Yourself to Save Money 504'