b'GN5 TRACK-WARRIORBuild-Your-owncomplete chassis & suspension package Want to Build a Track Car that Looks Like a Stock Car with an All Out Modern Trans Am Style Chassis, 18 Wheels & Road Course Performance to Match?We Got You!The GN5 (Grand National 5) is an All-in-One Package to Build-Your-Own Moderate Budget, DOM Tube Chassis, V8 Stock Car Track Car. Initially Designed to Fit the 105 WB Five-Star NASCAR ARCA Composite Race Bodies (See Page 615). Now it Also Works for Hand Built Steel 80s & Up Sheetmetal Bodies, with Stock Car Body Builders Around the Country (Pages 598-601). For Steel or Composite Bodies 76.50 to 78.00 Wide.Can Be Built with 105-110 Wheelbase & Ride Height from 2.5 to 4 with 0.5 Rake Down in the Front. Comes with Fully Optimized Road Course Geometry & Suspension Setup to Travel Up To 4.00 in Full Dive & Roll 1.0 at Max G-Force. Utilizes Forgeline Race Wheels, 18x13 Fronts with 10.00 Backspacing for Zero Scrub Radius & 18x13 Rears with 7.00 Backspacing. 13.2 Wide & 26.8 Tall Hoosier 345/35ZR18 Slicks on All Corners. This Complete Suspension, Steering & Chassis Package Has Been Specifically Engineered from Scratch by Ron Sutton to be One of the Best Performing Track Cars. Will Dominate Over Actual Stock Cars. Fits into Almost Every Track Day Organization for Fast Fun. Only Fits in a Few Specific Race Classes, like SCCA SPO, NASA Super Unlimited & Similar Classes in EMRA, COM & NorthEast GT.Ron Designed this NASA/SCCA Legal Tube Chassis for Race Weight Range of 3000#-3400# & Up to 800HP. This Chassis is Strong!Every Tube is Strategic in Size & Placement to Create Chassis Rigidity Where it is Needed for Track Performance & Increased Driver Protection, Without Unnecessary Weight. The 5-Zone DesignIncludes a Strong Cockpit & 4 Crush Zones. Two in Front & Two in the Rear. The Mild Steel TA Front Clip is MIG Welded on a Precision Fixture Table. It Utilizes Our GT 2-Piece Chromoly, Lower Control Arms, GT Upper Control Arm & Jack-Screw Shock Mount Package. Steel RSRT Track-Pro Spindles, with High Ackerman & Slotted Steering Arms are Steered by a Sweet Road Race Rack. Combined with the RSRT Torque Absorber, 3-Link/Watts Link Rear Suspension & Digressive Valved, RSRT/Fox Shocks, Provides Great Road Course Handling. This Track-Warrior Package is Designed for Quick & Easy Tuning for Track Conditions with Adjustable ShocksQuik-Tune Panhard or Watts LinkQuik-Tune Ride-Height & Corner Weight Adjustersand Quik-Tune Anti-Squat for the Best Balance of Rear Grip on Corner Entry & Exit. Plus 5 Fine Tuning Rates on the Front Sway Bar & 7 Fine Tuning Rates on the Rear Sway Bar. Our Offset 3-Link, Offers Zero Torque Steer. The Torque Absorber Helps Grip with High Power. This GN5 Track-Warrior is a Fast, Tube Chassis Track Car Package, Ready for You to Build it. Details in the Following Pages.464'