b'GN7 TRACK-WARRIORGrand-Am Spindles: oStrong T1 Steel Upright for Strength oNarrowest Spindle & Big HubPackage on the Market o5 KPI for Low Roll Setups oLower Scrub Radius oMore Room for Big Brakes oWilwood 13 & 14 & StopTech 14 Brakes Available for this Spindle o37.5% Larger Outer Snout thanPrevious Track-Star SpindlesGrand-Am Hubs & Super-Duty Bearings: o6061-T6 Aluminum Hubs o3/4 Thick Wheel Flanges oPractically Zero Wheel Deflection oXHD Timken Race Bearings oLoad Ratings / 2980# & 2430# o35% Stronger Outer BearingThan Previous Track-Star Hubs oSuper Duty 5/8-18 WheelStuds Made of 8740 Chromoly o5 x 4.75 or 5 x 5 Bolt Pattern oAluminum Dust Caps oNo Stamped Steel Caps toPry Off & Hammer On! Trick Hub Feature:oPrecise Seal BoresAllow Seals to Slip Fit oSeal Held in with ThreeStainless Flange Head Screws oSeals Can be Removed to Have the Bearings Inspected, Greased & Put Back Together WithoutDestroying the Seal ! Track-Star Steering Arms: o6061-T6 Aluminum Steering Arms Slotted for Offset Slugs to Adjust Steering Ratio oComes with 0, .250 & .500 Offset Slugs for 4.25-5.25 of Steering Arm Length Adjustment Range, in 1/4" Increments oActual Effective Steering Arm Range is Longer, Depending on Amount of Caster oYou can Change Slugs from Short & Fast Steering Ratio to Long & Stable to Suit the Drivers Needs in Minutes oHigh Outward Offset Increases Ackerman, Optimizing the Tire Slip Angle, IncreasingGrip on the Inside Front Tire & Adding Overall Front Grip 498'