b'GTS TRACK-WARRIORFrom Top to Bottom - No Other Frame & Suspension System Can Be Tailored Like Ours: oThis TA Track-Warrior Clip Allows Engine Set Back, But Does NOT Require It oEvery Suspension Point is Slotted for RSRT Precision Suspension Locating Slugs oRon Optimizes the Geometry Tailored to YOUR Desired Ride Height & Track Width2x3x .120 Wall Mild Steel Frame RailsMIG Welded on JIG Fixture Anti-Dive Built Slots for Upper Control Arm Slugs WithInto UCA Mounts Tailored Offsets for Optimum GeometrySlots for Rear Lower Control Arm SlugsUpper Lower Control Arm Mounted Gusseted for StrengthFabricated Track-Warrior Front Frame Clip with RSRT Optimized Geometry:oFront Sub-Frame Built to Fit Your Specific Car Body Wheelbase & Desired Ride Heighto2x3x.120 Wall Frame Structure / MIG Welded on Chassis Fixture / Ready to Install oAll Suspension & Steering Brackets are Accurately Welded in Place oStandard 32 Width with 320/660-18 Front Tires is 78.0 Overall Tire Sidewall-to-Sidewall Width While Utilizing Longer Control Arns for Less Scrub Radius oHeaders & Header Kits Available for All GM & Most Ford & Mopar V8 EnginesoFront End & Body Mounts Must Be Fabricated by Builder Slots for RearSlots for Front LowerStrut Rod Slugs Control Arm Slugs` Fore/Aft Slotted Rack & Pinion*The 1-Piece Saddle Style U-Shaped Mount for Adjustable AckermanCrossmember Adds Clearance for Engine Accessories & Header Tubes While Retaining Integral Crossmember & Sway Bar Mounting TubeMaximum Strength for the Front Clip Clip Shown Here is Side View of ZR Front ClipThis Photo Shows How Much Tire You Can Run With Any of Our Front Clips & Have Full Steering402'