b'TAL RACE-WARRIORLongTAL Upper Control Arms: oLonger Control Arms Reduce Geometry Change During Travel oTAL Upper Control Arms are 11.25 Pivot Axis to Center of Ball Joint!!! oThats Long for UPPER Control Arms! oBuilt with a Combination of 1.25 DOM & 4130 Tubing, TIG Welded in Precision Fixture oTrue A Frame Design with Cross Shaft Brace Near Pivots oThreaded Ball Joint Cups / Offset 1 Rearward for Optimum Caster Exclusive Feature: Quik-Tune Mounts:oFemale Hex Receiver Rotates in Precision Steel Collar oYou Can Adjust Either or Both Sides by Simply Looseningthe Jam Nut, Adjusting the Hex & Re-locking the Jam Nut oYou can Adjust Camber or Caster in LESS Than a MinuteWithout Unbolting the Lower Control Arms Quik-Tune Camber & Caster The Key is Our Trick Gold Hex Threaded Adjuster:oMicro Smooth & Precise OD .001 Smaller than the Precision Tube It Rides InNo Slop oFemale Threads in Adjuster Mate with the Male Threads of the Rod End oOnce the Jam Nut is Loosened, Rotating the Gold Hex Adjuster Lengthens or Shortens the Rod End Assembly to Achieve the Length You Want to Precisely Adjust Camber or Caster oNever Unbolt the Control Arm from the Chassis / Simply Adjust to Your Target Settings & Re-lock the Jam Nuts Billet Chromoly Control Arm Mounts:oPrecision CNC Machined from 1 SolidPiece of 4140 Billet Chromoly Steel oMachined to Fit Our 1.75 Tubing & ProvideMaximum Weld Area for Strength oSlotted Step for RSRT Precision Slugs oThe Design Places Rod End in Double Sheerwith .365 Thick Chromoly on Each Side o5/8-NF 170,000 PSI 12-Point Bolts & AN Hardware 96'