b'GTS RACE-WARRIOR Torrington Style Needle BearingsPair for Rear: oCaged Needle Bearing AssembliesoRide Between Two Stainless Steel Races oGo Under Springs to Completely Eliminate Spring Bind oAllows the Springs to Operate at Their True Rate Throughout Travel 3-Piece Splined Rear Sway Bar Kit:oFits into the 1.75 4130 Tube Mounted Integral in the Race-Warrior Rear Frame Clip o4140 Chromoly 1 OD, Gun-Drilled, Step-Down Sway Bar for Lighter WeightoDelrin Bushings with Optimum Clearance for Response & Non-Bind o6061-T6 Billet Aluminum Sway Bar Arms with 4 Tuning Holes for Fine Tuning oSway Bar Arms Run Outside of Frame & Forward Over the Rear Axle oLong Links Drop Down from Arms to Brackets Welded on Front of Axle Tubes o7075 Aluminum Wide Body Rod Ends, 170KSI 12-Point Hardware, AN Washers & Nylocks RACE-STAR CAMBERED Floater Race Rear End with Centerlock Hubs:oHD Ford SVO Racing Housing / TIG Welded o3 OD x .188 4130 Chromoly Tubes / Fixture Welded Straight o-1 CAMBERED Snouts & Crown Splined Axles = MORE REAR GRIP!oOptimum Secret Recipe Heat Treat, Hardened, Hy-Tuff Racing AxlesProven Strongest oSKF 1-Nut Race Hub Assemblies / Designed & Manufactured by SKF Racing Division oHeat Treat Case Hardened Alloy Steel / Genuine SKF Heavy Duty Hub/Bearing Assembly oSimilar Load Strength to C7 X-Tracker Hubs oRear Suspension & Brake Brackets Professionally Welded On oOil Cooler Ports, Vent, Fill & Drain Plugs Welded In / Inner Axle Seals Included 145'