b'TA RACE-WARRIORBuild-Your-own The TA Race-Warrior is Designed to Work with Every 80.65 Current Legal Trans Am Body, Including the Cadillac ATS-V, Both G6 Camaros, C7 Corvette, G3 Challenger & G6 Mustang. The TA Race-Warrior Was Designed to Perform Specifically at Trans Am Rules with the Ride Height at 1.97, Pirelli Tires & the Engine #1 Plug 1 Behind the FACL. If You Want the Ability to Race in Both Trans Am & SCCA GT1, We Recommend You Go with the TA Race-Warrior & Adjust for SCCA Rules at Events.There are LOTS of Older Cool Trans Am Bodies Available, Including 3rd, 4th & 5th Gen Camaros, Firebirds, Mustangs, Merkur, Capri, Jaguar XKR, C5/C6 & C7 Corvettes, Challengers, Vipers, Daytona, Olds Cutlass, Nissan 300ZX & More. Just Know They are NOT Trans Am Legal. The TA Has Around 50/50 F/R Weight Bias, Assuming You Run a Transmission Spacer to Place the Transmission 16 Behind the Block. Consult with Ron Sutton on Crank Heights & Oil Pan Depths. The Engineering & Setup are Done for You!The Front & Rear Frame Clips Come Fixture Welded so the Suspension Mounts are Correct. The Cage is Pre-Bent. Blueprints are Provided. The Builder will Need to Fabricate All New Sheetmetal. Fabrication Required for Body, Door & Front End Mounting. RSRT has Kits for This. You Need Welding & Fab Skills, Tools, a Flat Working Surface & Youre Good to Go. Ron Sutton is Available for Technical Support Throughout Your Build & Afterward for Setup & Track Tuning. If You Want to Build-Your-Own Winning TA Race Car, This TA Race-Warrior Package is What You Want. 185'