b'TECH TIP PAGE Mounting Front Sway Bar KitSThis page has some tips & specs to help you plan your 3-piece front sway bar installation.These specs are specifically for our TA2+, AX & AXT front sway bars with 1-1/4 x 48 splined bars & our sway bar arms. Column A are common lengths of 1-1/4 x 48 Splined Speedway Engineering Sway Bars we offer.Column B tells you how long toABCcut the 1.75 x .065 DOM Tubewe supply with our kits.Sway BarCut TubeLink Mounts onLengthTo LengthLCAs OverallSway Bar Length3229.5039.75Sway Bar Length3330.5040.75Sway Bar Length3431.5041.75Sway Bar Length3532.5042.75Sway Bar Length3633.5043.75Our bushings have a 1/4 flangeSway Bar Length361/2 34.0044.25on them.Once you push theSway Bar Length371/2 35.0045.25bushings into the tube, the overallSway Bar Length381/2 36.0046.25 Sway Bar Length3936.5046.75 length of the tube & the twobushings will provide the properSway Bar Length401/2 38.0048.25 1/4 of clearance needed for theSway Bar Length4239.5049.75 sway bar to move side-to-side and shorten when it twistswithout binding up.Column C shows you how wide the rod end links will be center-to-center, using our sway bar arms, spacers, hardware, etc.You can make this dimension 1/4" narrower by using 1/4" spacers against the arm instead of the 3/8 spacers we supply.You can also make it wider, but dont go over 3/4" or youll have issues. This shows the centerline of theCenterline of Bar to Centerline of Link Mount on LCA bar to link should be 8.75 for theUsing RSRT 1.25 x 48 Spline 8.25-9.25 Arms8.75 links to work with both holes in the sway bar arms.98'