b'Front Sway BarsMounting rear Sway Bar KitSThese specs are specifically for our rear sway bars with 1.00 x 48 splined bars & our straight billet aluminum sway bar arms in short or long lengths. Column A are common lengths of 1.00 x 48 Splined Speedway Engineering Sway Bars we offer.Column B tells you how long to cut the 1.75 x .065 DOM Tube we supply with our kits. RSRT #5909-1 Black "SHORT" Sway Bar Arms have 4 holes at 6.75" 7.50" 8.25" & 9.00" RSRT #5912-1 Black "LONG" Sway Bar Arms have 4 holes at 9.75" 10.50" 11.25" & 12.00"ABC Link Mounts Sway BarCut TubeonCommon BarsLengthTo LengthLCAs Overall Our bushings have a 1/4 flange onSway Bar Length2623.5027.125 them.Once you push the bushingsSway Bar Length2825.5029.125 into the tube, the overall length ofSway Bar Length3027.5031.125 the tube & the two bushings willSway Bar Length3229.5033.125 provide the proper 1/4 of clearanceSway Bar Length3330.5034.125 needed for the sway bar to moveSway Bar Length3431.5035.125 side-to-side and shorten when itSway Bar Length3532.5036.125 twistswithout binding up. Sway Bar Length3633.5037.125 Column C shows you how wideSway Bar Length361/2 34.0037.625 the rod end links will be center-to- Sway Bar Length371/2 35.0038.625 center, using our sway bar arms,Sway Bar Length381/2 36.0039.625 spacers, hardware, etc.Sway Bar Length3936.5040.125The D chart on the lower leftSway Bar Length401/2 38.0041.625 shows what the centerline of the barSway Bar Length4239.5043.125 to link should be for the links to work with 3 or 4 holes in the sway bar arms.Centerline of Bar to Link Mount on Axle TubesD Using RSRT SHORT Sway Bar Arms / ALL 4 HOLES7.875" Using RSRT SHORT Sway Bar Arms / LAST 3 HOLES8.250" Using RSRT LONG Sway Bar Arms / ALL 4 HOLES10.875" Using RSRT LONG Sway Bar Arms / LAST 3 HOLES11.250" Max Difference in Height from Bar to Last HoleE Using RSRT 1.00 x 48 Spline Short ArmsMax 1.00 Using RSRT 1.00 x 48 Spline Long ArmsMax 1.50 102'