b'Steering Racks for Road RacingOrders: 1-888-STEER-USTech support: 1-307-472-0550Fax: 1-307-235-1551e-mail: tech@woodwardsteering.comCF12ELHD rear steer, pinion angle 12 degrees leftPinion INBOARD of the left side mounting bracket. An INSET pinion allows the widest mounting of the rack relative to its overall length and is preferred for racing applications wherever possible. Can be built in any rack length from 24 inches (610 mm) up and with speeds of 1.57 (40), 1.83 (46,5), 2.09 (53), 2.36 (60), 2.62 (67), 2.88 (73), and 3.14 (80).CF12SELHD rear steer, pinion angle 12 degrees leftPinion OUTBOARD of the left side mounting bracket. Consistent with production automotive practice, an OFFSET pinion provides increased clearance around the pinion and steering shaft for tight packaging situations. Can be built in any rack length from 24 inches (610 mm) up and with speeds of 1.57 (40), 1.83 (46,5), 2.09 (53), 2.36 (60), 2.62 (67), 2.88 (73), and 3.14 (80).CF12E-209-3412Left Hand Drive Straight pinionCF00LHD front steer, straight pinionPinion INBOARD of the left side mounting bracket. An INSET pinion allows the widest mounting of the rack relative to its overall length and is preferred for racing applications wherever possible. Can be built in any rack length from 24 inches (610 mm) up and with speeds of 1.57 (40), 1.83 (46,5), 2.09 (53), 2.36 (60), 2.62 (67), 2.88 (73), and 3.14 (80).CF00SLHD front steer, straight pinionPinion OUTBOARD of the left side mounting bracket. Consistent with production automotive practice, an OFFSET pinion provides increased clearance around the pinion and steering shaft for tight packaging situations. Can be built in any rack length from 24 inches (610 mm) up and with speeds of 1.57 (40), 1.83 (46,5), 2.09 (53), 2.36 (60), 2.62 (67), 2.88 (73), and 3.14 (80).CF00ELHD rear steer, straight pinionPinion INBOARD of the left side mounting bracket. An INSET pinion allows the widest mounting of the rack relative to its overall length and is preferred for racing applications wherever possible. Can be built in any rack length from 24 inches (610 mm) up and with speeds of 1.57 (40), 1.83 (46,5), 2.09 (53), 2.36 (60), 2.62 (67), 2.88 (73), and 3.14 (80).CF00SELHD rear steer, straight pinionPinion OUTBOARD of the left side mounting bracket. Consistent with production automotive practice, an OFFSET pinion provides increased clearance around the pinion and steering shaft for tight packaging situations. Can be built in any rack length from 24 inches (610 mm) up and with speeds of 1.57 (40), 1.83 (46,5), 2.09 (53), 2.36 (60), 2.62 (67), 2.88 (73), and 3.14 (80).CF20RS-209-2480Right Hand Drive CF20R-236-265120 degree angled pinionCF20RRHD front steer, pinion angle 20 degrees rightPinion INBOARD of the right side mounting bracket. An INSET pinion allows the widest mounting relative to overall length and is the preferred style for racing applications wherever possible. Can be built in any rack length from 24 inches (610 mm) up and with speeds of 1.57 (40), 1.83 (46,5), 2.09 (53), 2.36 (60), 2.62 (67), 2.88 (73), and 3.14 (80).CF20RSRHD front steer, pinion angle 20 degrees rightPinion OUTBOARD of the right side mounting bracket. Consistent with production automotive practice, an OFFSET pinion provides increased clearance around the pinion and steering shaft for tight packaging situations. Can be built in any rack length from 24 inches (610 mm) up and with speeds of 1.57 (40), 1.83 (46,5), 2.09 (53), 2.36 (60), 2.62 (67), 2.88 (73), and 3.14 (80).52'