381 Track Tuning Tools Tire Quick Bleeder Just clip on and go to the next tire while the pressure drops automatically. The JOES Tire Purging & Set tool come with 3 springs allowing you to set the bleed valve for nearly any type of racing. The light spring is factory installed and has a range of 2-7 PSI. The medium spring has a range of 14- 29PSI and the heavy spring ranges from 30 to 68 PSI. The JOES Tire Purging & Set tool has been track tested by top Cup teams. These top teams clip on several JOES Purging & Set tools allowing their tire specialist to purge and adjust multiple sets of tires simultaneously. The days of standing around waiting for air to drain are over. Just clip on the JOES Tire Purging & Set tool and go. RST #9715-PT $69.95 Air –or- Nitrogen Tanks JOES Air Tanks are portable and lightweight. Available in horizontal, vertical and vertical compact sizes to fit any need. Tanks are equipped with a Quick Fill fitting to save you time. I use the small vertical one for nitrogen to fill the shocks at the track. Kinda crazy to spend zillions of dollars on gas shocks (nitrogen gas) and not have a nitrogen tank & shock pressure setting gauge. RST #9782-25 $99.95 2.5 Gallon RST #9782-50 $109.95 5 Gallon RST #9782-75 $119.95 7.5 Gallon Gas Shock Pressure Setting Gauge - Digital JOES Shock Inflator System allows you to adjust gas pressure in your shocks up to 200 PSI. A bleed valve quickly drops pressure so you can meter the pressure to match your desired results. Swivel fittings make it easy to connect the long hose while the shocks are on or off the car. Digital accuracy provides .1 resolution that cheaper versions are unable to match. RST #9780-JDS $179.95 Gas Shock Pressure Setting Gauge – Dial This is a 100 PSI gauge, specifically for RSRT valved shocks where the gas pressure is 10-70 PSI. This is the version my race crew & I have used for years. Screw the gauge onto your shock’s Schrader valve … read the pressure. Add nitrogen through the Schrader valve on the gauge until you have it where you want. RST #9781-100 $129.95 Recommended Shock Nitorgen Settings RSRT Ridetech TA Canister Shocks – 60 PSI Front / 40 PSI Rear RSRT Ridetech Non-Canister Shocks – 70 PSI Front / 50 PSI Rear RSRT JRI Canister Shocks – 50 PSI Front / 30 PSI Rear RSRT ARS Base Valve & Canister Shocks – 20 PSI Rear Tools