335 Canton Accusumps Accusump 3-Quart The 3 Quart Accusump is ideal for V-8 and high horsepower V-6 and 4 cylinders engines. It is the original and has been providing pre-oiling and surge protection in all types of racing and recreational vehicles for over 30 years.  Has a 16" long and 4-1/4" dia. body.  Valve Not Included. CAN #24-006 $228 High Pressure Accusump 3-Quart The 3 Quart High Pressure Accusump is ideal for big cubic inch engines operating at high oil pressures in severe racing conditions. If there is room for a unit of this size, the longer length allows it to hold more air and oil. This offers more pre-oiling and surge protection.  Has a 22" long and 4-1/4" dia. body.  Valve Not Included. CAN #24-016 $248 Accusump 2-Quart The 2 Quart Accusump is ideal for surge control on small block V-8, V-6, and 4 cylinder engines as well as pre-oiling for all engines. The 3-Quart version is best. But if room doesn’t permit, use this 2-Quart verions.  Has a 12" lon g and 4-1/4" dia. body.  Valve Not Included. CAN #24-026 $212 Accusump Manual Ball Valve #24-260 Manual Accusump Ball Valve with female 1/2" N.P.T. ends. Comes with 1/2" N.P.T pipe nipple for installation to the Accusump. CAN #24-260 $14 Accusump Pro Version EPC Valve This Electric Pressure Control Valve Kit is for a discharge/refill of 35-40 PSI. These valves have the convenience of an electric valve for remote mounted units and the rapid refill rate of a manual valve as required in racing. The E.P.C. valving will only allow the Accusump to discharge oil when the engine’s oil pressure drops below a predetermined level and only refill when the pressure rises above that level. Our Pro version valve features a more durable piston style design, an integrated pressure port and a machined aluminum body. CAN #24-271X 20-25 PSI $227 CAN #24-273X 35-40 PSI $227 CAN #24-275X 55-60 PSI $227 Oil System