269 Steering Column Accessories Steering Shaft Support Rod End  .757 ID for easy Shaft Turning  Bolts to the weld on brackets below ALL #52132 $9.99 Rod End Bracket Weld On Steering Shaft Support Bracket (for Rod End)  Pre-notched  Welds to 2” x 3” frame Rail  Put at any angle you need  Slotted for adjustment RST # 7159-F $19.99 Sweet Steering Shaft Straight Couplers  3/4” Smooth on one end / Splined on other end RST #7171-1 3/4” x 20 Spline for Woodward or Sweet Columns $14.99 RST #7175-1 3/4” x 48 Spline for Sweet R&P w/o Integral Servo $14.99 RST #7170-1 3/4” x 30 Spline for Sweet R&P w/Integral Servo $14.99 RST #7170-1 3/4” x 30 Spline for Newer Delphi 670 Steering Box $14.99 RST #7176-1 13/16” x 36 Spline for Older GM/Saginaw PS Box $14.99 RST #7177-1 3/4” x 36 Spline for Ford Rack & Pinion $14.99 Sweet Steering Shaft U-Joints  Sweet U-Joint 3/4” Smooth on one end / Splined on other end RST #7181-1 3/4” x 20 Spline for Woodward or Sweet Columns $49.99 RST #7185-1 3/4” x 48 Spline for Sweet R&P w/o Integral Servo $49.99 RST #7180-1 3/4” x 30 Spline for Sweet R&P w/Integral Servo $49.99 RST #7180-1 3/4” x 30 Spline for Newer Delphi 670 Steering Box $49.99 RST #7186-1 13/16” x 36 Spline for Older GM/Saginaw PS Box $49.99 RST #7187-1 3/4” x 36 Spline for Ford Rack & Pinion $49.99 RST #7182-1 3/4” Smooth x 3/4" smooth both ends $46.99 Important Steering Column Notes:  You will need 1 coupler or u-joint with the ¾” x 20 Spline to connect to your Woodward or Sweet Collapsible Column  You will need 1 coupler or u-joint with the correct spline to connect to your rack & pinion or steering box  And additional u-joints would need to be smooth on both ends to connect smooth ¾” OD tubing to create your steering column assembly with angled sections.  You will need 1 firewall support bearing  You will need 1 rod end support near any “free standing” u-joint Steering