226 Panhard Bar Adjusters – Frame Mount Slotted Frame Mount Frame Mount 1.5” x 2.5” x 22”Mild Steel Tubing It’s way Extra Long - You Cut it to Length Basic fabrication – cut & fit under your frame rail 1.5” x 2.5” brace can be mounted at 30° or 60° Slotted for 4” of Adjustability Adjusting the frame side of your panhard bar will be quick & easy. Loosen 1 bolt … adjust it … tighten 1 bolt Tubular race bolt, spacers & special slot hardware Avail RST #4661-2 Slider & Brace – No Hardware $84.99 RST #4661-2 Slider-Brace-XMBR – No Hardware $119.99 RST #4662-3 Slider & Brace – With Hardware $124.98 RST #4662-K Slider-Brace-XMBR – With Hardware $159.98 Panhard Bar Rod Ends Black Standard Width Chromoly Rod Ends WITH JAM NUTS / No Liner 3/4” x 3/4” - Rated at 25,000# With Jam Nuts & No Liner RST #4692-K For TT PHB $31.36 Wide Body XHD Chromoly Rod Ends 3/4” x 3/4” - Rated at 28,000# With Jam Nuts & Kevlar Liner RST #4691-K For TA2 & TA PHB $63.36 Panhard Bar Adjusters – Housing Mounts Housing Mount Panhard Bar Slide Adjuster - $99.99 Billet Steel / Painted Black Weld On for 3” Axle Tube Quick & Easy to Adjust 6” of Adjustment Range You only need 1 wrench RST #4650-1 Slider Housing MT $99.99 Quik-Tune Housing Mount Panhard Bar Jack-Screw Adjuster Quick & Easy to Adjust with ½” Ratchet – 6” of Adjustment Range No Photo Yet. Looks like one above, except Utilizes this Jack Screw Housing > > > Welds On for 3” Axle Tube / Adjusts with 1/2" Ratchet RST #4654-1 Ultra Low Jack Screw PHB ADJ $399.99 Suspension Components