189 Lower Control Arms Track-Warrior GT 2-Piece Lower Control Arms (Set of 2) 1.25” OD x .120” Wall Chromoly Tubing Weld In Threaded Spuds Front LCA Rectangular Braced Ball Joint Ring Correct Angle In & Back No Roll Strut Rod Clevis 40° Bend in Rear LCA Arm (Strut Rod) Lower Shock Mount Welded in Correct Motion Ratio Chromoly Sway Bar Mount in Correct Location & Angle All TIG welded – Bare – No Powder Coat No Rod Ends, Ball Joints or Hardware RST #1900-2 For 51.75” LBJ/60” WMS Width $949 RST #1901-2 For 52.75” LBJ/61” WMS Width $949 RST #1902-2 For 53.75” LBJ/62” WMS Width $949 RST #1903-2 For 54.75” LBJ/63” WMS Width $949 RST #1904-2 For 55.75” LBJ/64” WMS Width $949 RST #1909-2 Custom LBJ & WMS Width $1149 RST #1909-BYO Build-Your-Own GT Control Arm Kit $399 Includes Laser Cut Tubes, LBJ Cups, straight strut rod tubing, brackets & Spuds – No Hardware TA2 1-Piece Lower Control Arms (Set of 2) Laser Cut / FEA Engineered Steel LCA Structure Ball Joint Ring Correct Angle In & Back Special Shape for High Turn Angle Sway Bar Through Mount in Correct Location All MIG welded – Bare – No Powder Coat No Rod Ends, Ball Joints or Hardware Lower Shock Mount Welded in Correct Motion Ratio Utilizes Quik-Adjusters for camber, caster & track (Not Included) RST #1920-2 For 51.75” LBJ/60” WMS Width $599 RST #1921-2 For 52.75” LBJ/61” WMS Width $599 RST #1922-2 For 53.75” LBJ/62” WMS Width $599 RST #1923-2 For 54.75” LBJ/63” WMS Width $599 RST #1924-2 For 55.75” LBJ/64” WMS Width $599 RST #1929-2 Custom LBJ & WMS Width $699 RST #1919-BYO Build-Your-Own TA2 Control Arm Kit $199 Includes Laser Cut LCA Body, LBJ Cups, Cross Tubes, Sleeves – No Hardware TT 1-Piece Lower Control Arms (Set of 2) 1.125” OD x .120” Wall DOM Tubing – 17” Length Coil-Over Shock Mount Out for High Motion Ratio No Sway Bar Mounts – need to be welded on by client All MIG welded – Bare – No Powder Coat No Rod Ends, Ball Joints or Hardware RST #1931-2 PR w/Nylon & Steel Bushings $299 Suspension Components