185 BYO Control Arm Components BYO LCA Base Kit  Laser Notched Main Tube –  Correct Dimension for 13.375” Center Width  2 Precision Receiver Tubes  2 Gold Hex Rod End Receivers  All you need are tubing, balljoint cups & rod ends RST #2357-K LCA Base Kit $59.99 each kit 4130 Chromoly Round Tubing ALL #22063-4 1.25 ”x .095”Wall – 4’ $29.99 ALL #22063-8 1.25 ”x .095”Wall – 8’ $56.99 ALL #22064-4 1.25 ”x .120”Wall – 4’ $33.99 ALL #22064-8 1.25 ”x .120”Wall – 8’ $65.99 3/4” NF Threaded – Weld In Spuds  We use these to Build Strut Rods, LCAs, Trailing Arms, Panhard Bars, Suspension Links & more  Left Hand versions have hex for wrench  Right Hand Versions are smooth  We use LH for LCAs as they don’t rotate & have the wrench hex RST #2350-LHK LH - 1.25”x.120” Tube – Set of 4 $67.96 RST #2350-RHK RH - 1.25”x.120” Tube – Set of 4 $55.96 RST #2351-LHK LH - 1.25”x.095” Tube – Set of 4 $67.96 RST #2351-RHK RH - 1.25”x.095” Tube – Set of 4 $55.96 3/4” Rod Eye Clevis  We use these to connect our 2-Piece GT LCAS - .880” Inside Width RST #2359-2 Shock Mounts - Pair $15.99 Solid Rod Eye  We weld these 3/4" shank 1045 steel solid rod eyes into the RH spuds of our strut rods that bolt in the clevis above with 3/4" bolts, connecting the strut rod to the main GT LCA. Width is .875” to fit into clevis above. RST #2299-2 Solid Rod Eyes - Pair $25.98 Threaded Ball Joint Cups  We use these for all of our UCAs & LCAs RST #2285-1 K727 LBJ Cup $9.99 each RST #2286-1 K772 UBJ Cup $9.99 each Bracket Set for Flat Mount  Wing braced 1/8” thick brackets to mount sway bar links to TA2 LCAs RST #2375-K Set of 4 $19.99 Suspension Components