150 Complete TA2 3-Link Suspension package TA2 Premium Offset 3-Link: 6-Hole Chassis Brackets for Top Link Curved Slot Lower Link Frame Brackets Offset Upper Housing Brackets & Box Brace Premium TIG welded Lower Housing Brackets Threaded Lower Shock Mounts Black 1.25" x .095" DOM/4130 TIG Welded Tube Links 2-Way Poly Bushing Torque Absorber Top Link Softens the initial “hit” to the tire, ADDING GRIP Tapered Rod End Spacers for Links Wide Body Chromoly Rod Ends w/Liners & Jam Nuts 12-Point 170K PSI Bolts, AN washers & Nylocks Dimensions provided for Installation TA2 Double Adjustable Panhard Bar Kit: Driver Side Frame Mount 1.5” x 2.5” x 22” - Cut to Length Slotted for 4” of Adjustability Tubular race bolt, spacers & special slot nut hardware Laser cut 1.5” x 2.5” brace can be mounted at 30° or 60° Quik-Tune (Jack Screw Style) Housing Mount - 6” Range 12-Point 170K PSI Bolts, Spacers & Hardware Wide Body Chromoly Rod Ends & Jam Nuts Black 1.25" x .095" DOM/4130 TIG Welded Tube up to 38” Rear Frame Rail Kits: 2” x 3” x .120” Thick Wall Mild Steel Rails / Laser Cut Available Jig Welded & Unwelded for DIY Holes for Sway Bar & Shock X-MBR pre cut laser precise Rear Axle Centerline Mark & Slot precut into rails Flat top rail to makes it easier to land cage bars on Extra long rails front & back Cut to fit for any car or truck chassis build Laser Notched Crossmember: 2” x 3” x .120” Thick Wall Mild Steel Rails Extra Wide – 64” – To fit any body or chassis Laser Cut Half Moon for Driveshaft Oval Offset ½” to Pass Side to match Engine & Driveline offset Cut Widths are Laser Marked on each end ! Makes it quick & easy to fit to your car Driveshaft Loop: 1” x 2” Mild Steel Oval-Shaped – TIG Welded Your choice of 6.5”, 9.0” or 11” inside height Premium 4130 Links & Wide Body Rod Ends Included Frame & Suspension Kits